ORNAMENTAL FENCE COMPONENTS
Ornamental Steel Fence Posts, Brackets and Fittings—Strength in Every Connection.
The appearance and performance of an ornamental fence depend on more than the panels. The posts, brackets, caps, mounting hardware and fasteners must work together as one coordinated system.
CerKa Fence Supply helps contractors, fence installers, builders, property managers and property owners source the components required to complete ornamental steel fence projects throughout Ontario.
Whether you need materials for a new fence, a gate opening, a corner, an elevation change or a replacement section, provide us with your project information and we will help you organize the appropriate product categories.
Already have a drawing or material list?
Complete the Ornamental Fence System
A complete ornamental fence system may require:
- Ornamental steel fence panels
- Line posts
- Corner posts
- End posts
- Gate posts
- Post caps
- Panel brackets
- Corner and angle brackets
- Wall-mount brackets
- Base plates
- Anchor hardware
- Screws, bolts or other fasteners
- Gate hinges and latches
- Finish-repair or touch-up products, where available
The required components depend on the selected panel system, fence layout, mounting method, fence height, gate configuration and installation conditions.
CerKa Fence Supply can help organize these product categories into one quotation.
Ornamental Fence Post Types
Different locations along the fence may require different post configurations. The correct post must correspond with the panel system, fence layout and method of attachment.
Line Posts
Line posts support panels along straight sections of the fence.
Depending on the product system, panels may connect to opposite sides of the post using brackets, pre-routed holes, welded connections or other manufacturer-specific hardware.
When requesting line posts, provide:
- Fence panel product or style
- Panel height and width
- Panel rail dimensions
- Desired post height
- Embedded or surface-mounted installation
- Required colour or finish
- Number of straight fence sections
Corner Posts
Corner posts are used where the fence changes direction.
The required post and bracket arrangement depends on the angle of the corner and the way the selected panel system connects to the post. A standard 90-degree corner may require a different bracket configuration from an irregular or adjustable angle.
When requesting corner posts, identify:
- Number of corners
- Approximate angle of each corner
- Panel system
- Mounting method
- Fence height
- Required finish
End Posts
End posts are used where a fence line terminates without continuing to another panel.
They may be required beside buildings, retaining walls, gate openings or other termination points. An end post normally supports a panel from one side, but the exact connection depends on the selected fence system.
Gate Posts
Gate posts support the weight and operating forces of pedestrian or driveway gates.
Gate posts may require different dimensions, wall thicknesses, lengths, footings or mounting details from ordinary line posts. The appropriate configuration depends on:
- Gate type
- Single- or double-swing operation
- Gate width and height
- Gate frame and infill
- Hinge arrangement
- Latch configuration
- Ground conditions
- Expected operating conditions
- Manual or automated operation
Do not assume that a standard line post is suitable for a gate opening.
Blank or Universal Posts
Some ornamental fence systems may use blank posts or posts that are drilled or fitted for the specific project layout.
Availability and suitability vary by product family. Do not drill, cut or modify a coated post unless the product instructions and required coating-repair procedures have been confirmed.
Choosing the Correct Ornamental Fence Post
Post selection should be based on the complete fence system and actual installation conditions.
Important considerations include:
Fence Height
Taller fence systems may require different post dimensions, post lengths, spacing or installation details.
Panel Width and Rail Dimensions
Brackets and post connections must correspond with the panel’s actual rail dimensions. The nominal panel width may not be the same as the installed post-to-post spacing.
Fence Layout
Straight sections, corners, ends, gate openings, wall connections and changes in direction can require different posts and fittings.
Mounting Method
Posts may be designed for installation in concrete or for surface mounting with a base plate. These configurations are not automatically interchangeable.
Gates
Gate posts may need to resist significantly different loads from ordinary fence posts.
Site Conditions
Soil, frost, drainage, wind exposure, elevation changes and the supporting surface can affect the required post and foundation design.
Applicable Requirements
The purchaser and installer must confirm property boundaries, underground utilities, permits, engineering requirements and applicable building, safety and pool-enclosure regulations before installation.
Ornamental Fence Brackets
Brackets connect the horizontal rails of an ornamental panel to the posts, walls or other approved supporting structures.
The bracket must match the panel rail, post, connection direction and required finish.
Line Brackets
Line brackets connect panels along straight fence sections.
The exact number and style of brackets depend on the panel design, number of horizontal rails and manufacturer’s connection system.
End Brackets
End brackets connect a panel to an end post, gate post, wall or another approved termination point.
Corner Brackets
Corner brackets create a change in fence direction. Some systems use fixed 90-degree brackets, while others may offer adjustable-angle options.
Adjustable-Angle Brackets
Where available, adjustable brackets may help accommodate non-standard corners or changes in direction.
The permitted adjustment range and compatibility must be confirmed for the selected fence system.
Wall-Mount Brackets
Wall-mount brackets may be used to connect a fence panel to an approved wall, column or structural surface.
The supporting material, anchor type, edge distance, waterproofing and structural capacity must be reviewed before installation.
CerKa Fence Supply does not represent that every wall or structure is suitable for supporting a fence connection.
Gate Connection Hardware
Gate openings may require specialised hinges, latches, stops, drop rods, brackets or other components.
These products should be selected according to the gate size, weight, frame, post and operating requirements.
Bracket Compatibility Matters
A bracket that appears similar may not fit every ornamental panel or post.
Before ordering, confirm:
- Panel manufacturer or product family
- Panel style
- Horizontal rail dimensions
- Post dimensions
- Required connection angle
- Number of rails
- Mounting surface
- Fastener requirements
- Colour and finish
- Indoor or outdoor application
Do not combine panels, posts or brackets from different product families unless their compatibility has been confirmed.
If you do not know the product identification, send clear photographs and measurements with your quote request.
Post Caps and Decorative Finishing Components
Post caps close the top of the post and help provide a finished ornamental appearance.
Depending on the selected system, available cap styles may include:
- Flat caps
- Pyramid caps
- Ball caps
- Decorative caps
- Press-fit caps
- Welded caps
- Manufacturer-specific post tops
The cap must correspond with the post dimensions and installation method.
Decorative options, materials, colours and attachment methods vary. Contact CerKa Fence Supply to confirm available products.
Surface-Mounted Ornamental Fence Posts
Surface-mounted posts use a base plate and anchor system to connect the fence to a suitable concrete or structural surface.
A surface-mounted installation may require:
- Post with an integrated base plate
- Separate base-plate assembly
- Approved anchors
- Base-plate cover
- Shims or levelling components
- Corrosion-compatible fasteners
- Site-specific structural review
Before selecting a surface-mounted post, confirm:
- Supporting material
- Concrete thickness and condition
- Distance from slab edges
- Existing cracks or deterioration
- Fence height
- Post spacing
- Wind exposure
- Gate loads
- Anchor requirements
- Applicable engineering or code requirements
Surface mounting is not suitable for every slab, curb, retaining wall or structure.
The installer or project professional is responsible for confirming the supporting structure and anchor design.
Embedded Ornamental Fence Posts
Embedded posts extend below grade and are typically set into a designed foundation.
The required post length and foundation depend on factors such as:
- Fence height
- Post spacing
- Gate locations
- Soil conditions
- Frost conditions
- Drainage
- Wind exposure
- Project location
- Local requirements
- Engineering specifications
CerKa Fence Supply can provide available material information but does not determine foundation dimensions or certify installation conditions.
Final post embedment, concrete and foundation requirements must be established by the installer or qualified project professional.
Fasteners, Anchors and Mounting Hardware
The connection hardware is an essential part of the ornamental fence system.
Depending on the product, installation may require:
- Screws
- Bolts
- Nuts and washers
- Rivets
- Self-drilling fasteners
- Security fasteners
- Concrete anchors
- Masonry anchors
- Bracket pins
- Hinge bolts
- Manufacturer-specific hardware
The hardware must be appropriate for the panel, post, bracket, mounting surface and environmental conditions.
Do not assume that brackets, fasteners or anchors are included with panels or posts unless they are specifically identified in the quotation.
Matching the Finish
Panels, posts, brackets, caps, gates and visible hardware should be coordinated whenever a consistent finished appearance is required.
When requesting materials, identify:
- Desired colour
- Existing fence colour, if matching a previous installation
- Gloss or texture, when known
- Product manufacturer or collection
- Whether components are for a new or existing fence
- Photographs of the existing material
Colour and texture can vary between manufacturers, production runs, coating systems and exposure conditions.
An exact match with an existing or weathered fence cannot be assumed without product confirmation.
Cuts, Drilled Holes and Coating Repair
Cutting, drilling, grinding or welding coated steel can expose the underlying metal and affect the protective finish.
Before modifying a product:
- Review the applicable product instructions
- Confirm whether field modification is permitted
- Use suitable tools and procedures
- Remove metal filings
- Treat exposed areas using an approved repair method
- Avoid incompatible metals or fasteners
- Confirm whether the modification affects product coverage or performance
Contact CerKa Fence Supply for available product information before modifying panels, posts or fittings.
Corners, Slopes and Changes in Elevation
Projects with slopes, steps or irregular angles require additional planning.
Depending on the ornamental panel system, the fence may use:
- Rackable panels
- Stepped panels
- Adjustable brackets
- Custom transitions
- Longer posts at elevation changes
- Modified panel sections
- Site-specific fabricated components
Not every ornamental panel can follow a slope in the same way.
Provide photographs, approximate grades, elevation information and a layout drawing so the required product categories can be reviewed before ordering.
Mounting to Walls, Columns or Existing Structures
Connecting an ornamental fence to a building, masonry column, retaining wall or existing structure requires a suitable connection detail.
Before ordering wall-mount components, identify:
- Supporting material
- Structure dimensions
- Surface condition
- Panel height
- Panel rail dimensions
- Required connection location
- Available edge distance
- Waterproofing considerations
- Project-specific structural requirements
Do not attach fencing to masonry veneer, coping, thin slabs or unidentified structures without appropriate professional review.
Planning the Component Quantities
A complete ornamental fence material list may include:
- Fence panels
- Line posts
- Corner posts
- End posts
- Gate posts
- Post caps
- Brackets for each panel connection
- Corner or adjustable brackets
- Wall-mount brackets
- Screws, bolts or other fasteners
- Base plates
- Anchors
- Pedestrian gates
- Driveway gates
- Hinges
- Latches
- Drop rods
- Gate stops
- Finish-repair products
- Additional project-specific accessories
Quantities depend on the actual layout. A simple linear-footage calculation is not enough to determine every post, bracket and fitting.
A marked drawing showing straight sections, corners, ends and gate openings can help reduce missing or incorrectly selected components.
Information to Include with Your Quote Request
To help CerKa Fence Supply review the requested components, provide as much of the following information as possible:
- Project name
- Project location
- Residential, commercial or institutional application
- Ornamental panel product or style
- Fence height
- Panel width
- Horizontal rail dimensions
- Total approximate linear footage
- Number of straight sections
- Number and angle of corners
- Number of fence ends
- Number and size of gates
- Embedded or surface-mounted posts
- Wall or column connections
- Ground slopes or elevation changes
- Required colour or finish
- Required material date
- Pickup or delivery preference
- Drawings, photographs or material lists
If some details are unavailable, submit the information you currently have. We will identify what additional product information is needed to prepare the quotation.
Replacing an Existing Post, Bracket or Fitting?
Replacement components should be identified carefully because ornamental fence parts are not universally interchangeable.
Please provide:
- Clear photographs of the complete fence
- Close-up photographs of the connection
- Post width and depth
- Panel rail width and height
- Bracket dimensions
- Fastener-hole spacing
- Fence height
- Existing colour
- Manufacturer markings, labels or part numbers
- Quantity required
Place a ruler or measuring tape beside the component in at least one photograph whenever possible.
CerKa Fence Supply will use the submitted information to help identify potential product categories. Final compatibility must be confirmed before installation.
Frequently Asked Questions
Can the same post be used at every location?
Not necessarily. Straight sections, corners, ends and gate openings may require different posts or bracket arrangements.
Will any ornamental bracket fit my fence panel?
No. Brackets must correspond with the panel rail dimensions, post dimensions, connection direction and product system.
Is the advertised panel width the same as the post spacing?
Not always. Installed post spacing can be affected by bracket depth, connection clearances and the selected product system. Confirm the required layout dimensions before setting posts.
Are brackets and fasteners included with the panels?
Only if they are specifically identified in the product description or quotation. Do not assume that hardware is included.
Can ornamental posts be surface mounted?
Some systems may offer surface-mount posts or base-plate assemblies. Suitability depends on the supporting structure, anchors, fence configuration and project requirements.
Can a fence panel be connected directly to a wall?
A compatible wall-mount bracket and approved supporting structure may be required. The wall, anchors and connection detail must be reviewed before installation.
Can I drill or cut the posts at the job site?
Field modifications may be possible for certain products, but they must follow the applicable product instructions and coating-repair procedures.
Can a line post be used as a gate post?
Do not assume that it can. Gate posts must be selected according to the gate dimensions, weight, hinges and operating forces.
Can CerKa help identify an existing bracket?
Send clear photographs, measurements and any available manufacturer information. We can review the information and help identify potential product categories, but compatibility must be confirmed before installation.
Does CerKa Fence Supply install ornamental fencing?
CerKa Fence Supply supplies fence materials and components. Installation services are not represented on this page.
Are all posts, brackets and fittings kept in stock?
Product availability, colours, dimensions and quantities can change. Contact CerKa Fence Supply to confirm current availability before planning the project.
Important Product and Installation Notice
Product dimensions, materials, finishes, connection methods and availability vary by manufacturer and product family.
All measurements, quantities and compatibility requirements must be confirmed before ordering.
The purchaser and installer are responsible for verifying:
- Property boundaries
- Underground utilities
- Permits
- Final measurements
- Supporting structures
- Post spacing
- Foundations and anchors
- Gate loads
- Installation conditions
- Engineering requirements
- Applicable building, safety and pool-enclosure regulations
CerKa Fence Supply provides fencing materials and product-selection support. It does not provide engineering approval, code certification or installation guarantees.
Complete the Ornamental Fence with the Right Components
Send us your fence layout, panel information, photographs or material list.
CerKa Fence Supply will help you organize the ornamental posts, brackets, caps, mounting hardware and fittings required for your quotation.