VICTORIA 6/5/6 DOUBLE-WIRE FENCE SYSTEM
Victoria 2D Double-Wire Fence Panels for Rigid Perimeters.
Meet Victoria—CerKa Fence Supply’s rigid 2D double-wire fence system.
The Victoria panel combines one 5 mm vertical wire with two 6 mm horizontal wires to create a reinforced 6/5/6 configuration with a clean, flat profile.
Source Victoria panels together with compatible posts, connection hardware, gates and available accessories for a coordinated fence-material package.
Already have a drawing or material list?
Meet the Victoria Fence System
Victoria is CerKa Fence Supply’s 2D double-wire welded fence system for projects requiring panel rigidity, visibility and a clean professional appearance.
Each vertical wire is positioned between two horizontal wires. This twin-wire arrangement reinforces the panel across its width while maintaining an open rectangular mesh.
Unlike a 3D welded wire panel, Victoria does not depend on formed V-bends for reinforcement. Its double horizontal wires create a strong, flat and consistent panel profile.
The Victoria system offers:
- A 6/5/6 twin-wire configuration
- Double horizontal reinforcement
- A rigid, flat panel profile
- Visibility through the fence
- A clean commercial appearance
- Compatible post and connection options
- Pedestrian and vehicle gate options
- Available privacy and security accessories
Victoria Reference Specifications
The current CerKa product drawing shows the following nominal configuration:
- Product feature Victoria specification
- CerKa product name Victoria
- Fence system 2D double-wire
- Technical configuration 6/5/6 twin-wire
- Panel width 2,400 mm
- Panel height 1,800 mm
- Mesh opening 50 × 200 mm
- Vertical wire diameter 5 mm
- Horizontal wire diameter 6 mm + 6 mm
- Panel profile Flat
- Reference post section 50 × 50 × 3.0 mm
- Reference post length 2,730 mm
Approximate imperial dimensions:
- Panel width: 7 ft 10 1/2 in
- Panel height: 5 ft 10 7/8 in
- Mesh opening: 2 in × 7 7/8 in
- Reference post section: Approximately 2 in × 2 in
- Reference post length: Approximately 8 ft 11 1/2 in
All measurements are nominal reference dimensions. Final specifications, colours, coatings, posts, fittings and availability must be confirmed in the CerKa Fence Supply quotation.
What Does 6/5/6 Mean?
The numbers 6/5/6 describe the diameters and arrangement of the steel wires used to manufacture the Victoria panel.
First 6
One 6 mm horizontal wire is welded to one side of the vertical wire.
5
A 5 mm vertical wire runs between the two horizontal wires.
Second 6
A second 6 mm horizontal wire is welded to the opposite side of the vertical wire.
This twin-wire arrangement provides horizontal reinforcement across the panel and distinguishes Victoria from a standard single-horizontal-wire panel.
The terms customers may use for this type of product include:
- 2D double-wire fence
- Twin-wire fence
- 6/5/6 fence panel
- 656 welded mesh panel
- Double-horizontal-wire fence
- Rigid welded wire panel
All these terms should be confirmed against the Victoria specifications before ordering.
Why Choose the Victoria Fence System?
Reinforced Panel Construction
The two 6 mm horizontal wires reinforce the panel across its width, while the 5 mm vertical wires maintain the panel’s mesh structure.
Clean, Flat Profile
Victoria does not use the formed bends found in a standard 3D panel. The result is a flat, uniform fence panel with a professional appearance.
Clear Visibility
The open 50 × 200 mm mesh maintains visibility through the fence while creating a defined physical boundary.
Commercial Appearance
The consistent mesh pattern and flat panel profile are suitable for properties where presentation and perimeter organization are important.
Modular System
Victoria panels connect to compatible posts using system-specific brackets, clamps or fasteners.
Complete-System Sourcing
CerKa Fence Supply can help organize Victoria panels, posts, connection hardware, gates and compatible accessories into one quotation.
Common Victoria Fence Applications
Commercial Properties
Define the perimeter of offices, retail properties, warehouses, parking areas and equipment enclosures.
Industrial Facilities
Create rigid fence lines around manufacturing properties, storage areas, utility zones and industrial yards.
Schools and Institutional Properties
Maintain visibility while creating defined boundaries around schools, municipal facilities and institutional buildings.
Sports and Recreational Facilities
Use rigid panels around fields, courts, parks and recreational areas, subject to applicable project and safety requirements.
Public Infrastructure
Support infrastructure projects requiring a clean, organized and visible perimeter.
Residential Properties
Consider Victoria for residential projects where panel rigidity, visibility and a flat modern appearance are priorities.
The correct application depends on the property, intended use, layout, security requirements and applicable project specifications.
Everything Needed to Complete Victoria
Victoria is more than a fence panel. A complete system requires compatible supporting components.
CerKa Fence Supply can help organize the following product categories into one material quotation.
Victoria Double-Wire Panels
Determine the panel quantity based on the total fence length, layout, gate openings, corners and termination points.
Line Posts
Line posts support panels along straight sections of the fence.
Corner Posts
Corners and changes in fence direction require appropriate post positioning and connection hardware.
End Posts
End posts terminate a fence line and may require a different connection arrangement from a standard line post.
Gate Posts
Gate openings may require different posts and supporting requirements from the standard Victoria fence line.
Brackets, Clamps and Fasteners
Compatible fittings secure the Victoria panels to the selected posts.
Each connection must be checked for compatibility with the:
- 6/5/6 panel configuration
- Post shape and dimensions
- Fence height
- Connection location
- Selected fastener
- Required finish
- Project environment
Post Caps
Compatible caps finish the tops of the posts and help protect open post ends.
Pedestrian and Vehicle Gates
Add access points using compatible gate frames, infill, posts, hinges, latches and other required hardware.
Privacy Products
Compatible privacy products may be available for selected applications. Adding privacy material can increase wind loading on the fence.
Security Accessories
Security extensions or post arms may be available for selected projects. Their suitability must be confirmed according to the intended application.
Victoria Posts and Panel Connections
The posts and connection hardware are essential parts of the Victoria fence system.
The current CerKa reference drawing shows:
- Square steel post section: 50 × 50 mm
- Post wall thickness: 3.0 mm
- Reference post length: 2,730 mm
The final post selection depends on:
- Fence height
- Fence-line layout
- Post spacing
- Corner and end locations
- Gate openings
- Installation method
- Required embedment
- Soil and ground conditions
- Wind exposure
- Privacy products
- Security extensions
- Engineering requirements
- Project specifications
The reference post shown in the product drawing should not be interpreted as suitable for every installation condition.
Connection hardware must match the Victoria panel and selected post. Do not assume that every welded wire bracket or clamp is compatible with this system.
Victoria vs. 3D Welded Wire Fence
Both systems use welded horizontal and vertical steel wires, but their reinforcement methods are different.
Victoria 2D Double-Wire
- Uses two horizontal wires around each vertical wire
- Uses a 6/5/6 wire configuration
- Maintains a flat panel profile
- Provides increased horizontal reinforcement
- Is commonly considered for commercial, industrial, institutional and recreational projects
3D Welded Wire
- Uses single horizontal and vertical wires
- Includes formed reinforcing bends
- Has a three-dimensional panel profile
- Provides a clean and modern general-perimeter option
- Is commonly considered for residential, commercial and recreational applications
Choose Victoria when the flat profile and double horizontal reinforcement are important project requirements.
Victoria vs. 358 Anti-Climb Fence
Victoria and 358 anti-climb panels are designed around different project priorities.
Victoria
- Mesh opening: 50 × 200 mm
- Wire configuration: 6/5/6
- Double horizontal reinforcement
- Flat panel profile
- Open visibility
- Increased panel rigidity
358 Anti-Climb
- Current CerKa mesh opening: 76.2 × 12.7 mm
- Current CerKa wire diameter: 4 mm
- Close-mesh construction
- Reduced gripping and foothold opportunities
- Commonly considered for higher-security applications
Victoria is not the same product as a 358 anti-climb panel. The appropriate system should be selected according to the property’s security requirements and project specification.
Gates for the Victoria Fence System
Pedestrian and vehicle gates can be coordinated with the Victoria fence line.
A complete gate package may require:
- Single or double gate leaves
- Compatible welded wire infill
- Gate posts
- Hinges
- Latches
- Drop rods
- Gate stops
- Hold-open hardware
- Locking components
- Additional access hardware
When requesting a Victoria gate quotation, provide:
- Number of gates
- Clear opening width
- Required gate height
- Single- or double-swing preference
- Direction of swing
- Manual or automated operation
- Expected use and traffic
- Locking requirements
- Access-control requirements
Gate dimensions, supporting posts, hardware and operation must be confirmed before ordering.
Victoria Colours, Coatings and Finishes
The protective finish contributes to the appearance and service life of the Victoria fence system.
Available colours, coating systems and finishes may vary according to product availability, order quantity and project requirements.
When requesting a quotation, identify:
- Preferred colour
- Required coating or finish
- Indoor or outdoor application
- Environmental exposure
- Project specification
- Required warranty documentation
The exact colour and finish must be confirmed in the CerKa Fence Supply quotation.
Website photographs and digital screens may not accurately represent the final product colour, texture or coating.
Planning Victoria Panel Quantities
The number of Victoria panels cannot be determined accurately from total linear footage alone.
A complete takeoff should consider:
- Total fence length
- Panel width
- Required fence height
- Corners and direction changes
- Ends and termination points
- Gate openings
- Grade changes
- Partial panels or field cuts
- Post spacing
- Connection hardware
- Waste or spare material requirements
CerKa Fence Supply can review the information submitted for quotation purposes. Final field measurements, panel quantities and post quantities must be verified by the purchaser or installer.
What to Include in a Victoria Quote Request
Providing complete project information helps reduce delays, missing components and quotation revisions.
Whenever possible, include:
- Victoria 2D double-wire or 6/5/6 panel request
- Approximate total linear footage
- Required fence height
- Number of corners
- Number of fence ends
- Number and size of gates
- Preferred colour or finish
- Installation method
- Privacy requirements
- Security-accessory requirements
- Project location
- Required material date
- Drawings, photographs or material lists
Do not know every detail? Send the information you currently have. CerKa Fence Supply will identify the additional information needed to continue the quotation.
Victoria Fence Materials for Contractors
CerKa Fence Supply helps fence contractors and installers organize Victoria material requests.
Send us your takeoff, drawings or project information for assistance coordinating:
- Victoria panel quantities
- Line, corner and end posts
- Gate posts
- Brackets and clamps
- Fasteners
- Pedestrian and vehicle gates
- Gate hardware
- Privacy products
- Security accessories
- Pickup or delivery requirements
Final dimensions, quantities and product suitability must be reviewed and confirmed by the purchaser or installer before ordering.
Frequently Asked Questions
What Is the Victoria Fence System?
Victoria is CerKa Fence Supply’s 2D double-wire welded fence system. The current configuration uses two 6 mm horizontal wires and one 5 mm vertical wire.
What Does 6/5/6 Mean?
It describes the wire arrangement: one 6 mm horizontal wire, one 5 mm vertical wire and a second 6 mm horizontal wire.
Is Victoria Also Called a Twin-Wire Fence?
Yes. This type of panel may be described as double-wire, twin-wire, 6/5/6 or 656 welded mesh fencing.
What Size Is the Current Victoria Panel?
The current CerKa reference drawing shows a panel measuring 2,400 mm wide by 1,800 mm high.
What Is the Victoria Mesh Opening?
The current reference drawing shows a mesh opening of 50 × 200 mm.
Is Victoria the Same as a 3D Welded Wire Panel?
No. Victoria uses double horizontal wires and maintains a flat profile. A 3D panel uses formed reinforcing bends.
Is Victoria an Anti-Climb Fence?
Victoria is not the same product as a 358 anti-climb panel. Projects requiring a close mesh and reduced gripping opportunities should be compared with the 358 system.
Are Posts and Fittings Included?
Panels, posts, fittings and gates should be identified separately in the quotation. Request a complete Victoria system if you require all associated components.
Can Gates Be Added?
Yes. Gate size, operation, supporting posts and access hardware must be identified and confirmed.
Can Privacy Products Be Added?
Compatible privacy products may be available. Privacy products can increase wind loading, so system compatibility and supporting requirements must be evaluated.
Does CerKa Install Victoria Fencing?
CerKa Fence Supply is a fence-material distributor. Installation is not represented as part of the product supply unless it is specifically stated and contracted separately.
Is Victoria Always in Stock?
Product availability may change. Contact CerKa Fence Supply to confirm current quantities, lead times and order requirements.
Is Pickup or Delivery Available?
Pickup and delivery options are confirmed according to order size, product dimensions, destination and current availability.
Important Victoria Product Information
The specifications on this page are based on the current CerKa Victoria reference drawing and are provided for preliminary product planning.
Final dimensions, wire configuration, quantities, colours, finishes, fittings, compatibility and availability must be confirmed in the CerKa Fence Supply quotation before an order is approved.
Product photographs may represent the general Victoria fence system and may not show the exact panel, post, bracket, fastener, colour or finish included in a quotation.
The project owner, designer, purchaser and installer remain responsible for confirming field measurements, quantities, installation design, foundations, wind loading, gate requirements and compliance with applicable codes and regulations.
Ready to Quote the Victoria Fence System?
Tell us the required fence length, height, gate openings, project location and preferred finish.
CerKa Fence Supply will help organize the Victoria panels and associated posts, fittings, gates and accessories for a complete material quotation.